Skip to main content
FREE Delivery!|Get a quote

Landscaping material calculators for West Virginia

Start with your project dimensions, then estimate the amount here. For depth recommendations, coverage tables and examples, use the calculator on the individual material page.

Free delivery on every orderacross West Virginia served✓ Delivery in as fast as 2 business days

Add your project measurements

ft
Enter a length greater than 0
ft
Enter a width greater than 0
ft
Enter a diameter greater than 0
in
Enter a depth between 0.25 and 24 inches
Add 5% extra for compaction & spillage

One cubic yard fills a cube 3 x 3 x 3 feet. Bulk products are purchased by cubic yard or ton, so you need to turn the size of your project into one of those measures. These calculators make that conversion for 24 listed materials using each material's actual weight per cubic yard. Shredded mulch is about 600 lb per yard, while crusher run is 3,000 lb per yard. They occupy the same cube, but crusher run weighs five times more. That is why tonnage can be off when using a general aggregate calculator.

Pick a material

How the calculation is figured

First find the volume: multiply the length and width in feet, then multiply by the depth in feet. To convert inches to feet, divide by 12. That result is cubic feet. Divide it by 27 to get cubic yards, then use the material density to determine tons. The calculators handle those steps from the measurements you enter.

Cubic yards = (Length ft × Width ft × Depth in ÷ 12) ÷ 27
Tons = cubic yards × density (0.3 for mulch, up to 1.55 for riprap)

A good area measurement can still lead to a wrong estimate if the depth is guessed. A 10 x 10 patio at 2 inches takes half the stone required at 4 inches. If you need a starting point, each material page shows depths suited to its intended projects.

See all 24 materials

The calculators use the figures shown in this chart. Use it to compare materials or review a quote from another yard:

MaterialWeight per yd³Tons per yd³Typical depth1 yd³ covers at 3"Sold by
Driveway / walkway gravel≈ 2,800 lb1.402–4" (6" new drive)108 sq ftTon
Pea gravel (3/8")≈ 2,800 lb1.402–3"108 sq ftTon
Crushed stone #57 / 3/4"≈ 2,800 lb1.402–4"108 sq ftTon
Crusher run / road base≈ 3,000 lb1.504" compacted108 sq ftTon
River rock (1–3")≈ 2,700 lb1.352–4" by size108 sq ftTon
Mason / washed sand≈ 2,700 lb1.351–6" by use108 sq ftTon
Topsoil (screened)≈ 2,200 lb1.102–6"108 sq ftYard
Garden soil (blended)≈ 2,000 lb1.004–12" by bed108 sq ftYard
Fill dirt≈ 2,400 lb1.20as needed108 sq ftYard
Shredded mulch≈ 600 lb0.302–3"108 sq ftYard
RipRap / armor stone≈ 3,100 lb1.5512"+ layersn/aTon

Choosing material for the work

  • For a new driveway or parking pad, put crusher run or road base below and driveway gravel or #57 stone above. Estimate each of the two layers separately.
  • For standing water, a wet trench or a French drain, use clean #57 or drain rock at a depth of 12 inches or more.
  • Use shredded mulch around plantings. Choose river rock for a border that does not need regular refreshing.
  • For bare or sparse grass, spread 4 to 6 inches of screened topsoil before adding seed or sod.
  • Build up a low area or fill a hole with fill dirt, then use topsoil only for the upper 4 to 6 inches.
  • A paver patio needs compacted base beneath 1 inch of bedding sand. The Paver Base and Paver Sand calculators let you estimate those layers separately.
  • For playground fall areas, maintain pea gravel at a depth of 9 to 12 inches.
  • For a creek bank or shoreline that is washing away, install riprap over fabric in 12-inch-plus layers.

From an estimate to delivery at your drive

The materials listed above are West Virginia Rock Supply products. All orders across West Virginia receive free delivery, often within 2 business days. Calculate what you need, follow the link to the product page, and check out. You can also send your measurements through our contact form, and we'll work through the calculation with you.

Ordering questions and answers

Which calculator do I need?
Pick the calculator tied to the material you plan to buy because it uses that material's actual weight. Looking at pea gravel and river rock for one path? Put the same dimensions into each tool. The volume is unchanged, but the tonnage and price are not.
Should I buy cubic yards or tons?
Order using the unit shown on the product page. Stone and gravel are sold by the ton, while soils and mulch are sold by the yard. Each calculator displays both amounts, so you can skip hand conversions.
How close are calculator estimates?
The formula is exact, but site conditions can vary. Moisture, compaction and uneven ground can change the amount needed by about 10-15%, so results are given as a range and crushed materials include a small extra allowance by default. Checking measurements twice helps keep your order within that range.
Can one delivery have multiple materials?
Yes. Calculate every layer separately, then place them together in one order. For example, use base stone below surface gravel, fill dirt below topsoil, or mulch beside edging rock. Delivery is still free.
Are all calculator materials for sale?
Yes, all 24 materials are available. Each result links to its matching product page with your calculated quantity.

Once you have a price, delivery is free.

All 24 materials shown in these calculators are available with free delivery across West Virginia.

Shop all products