Skip to main content
FREE Delivery!|(304) 486-3987

Gilmer County, West Virginia ยท Free Delivery

Bulk Aggregates for Pathways in Shock, WV

Free delivery to Shock on every order, with loads arriving in as fast as 2 business days.

Delivering to Shock, WV

Free delivery on every order.

  • Free delivery to Shock
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Shock

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Shock

Graded crushed stone for drainage, concrete and heavy work.

Riprap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Shock

Decorative delivered to Shock

Rounded stone for beds, borders and water features.

Sand delivered to Shock

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Shock

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Shock works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Shock.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Shock addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Order gravel and aggregate delivery in Shock, WV by the ton or by the yard. West Virginia Rock Supply delivers bulk crusher run, washed stone, sand and soil across Gilmer County.

Pick a quantity, size the load with the calculator, and choose a delivery date at checkout. A dump truck tips the material on site.

Ground and Conditions in Shock

This is rolling to steep dissected hill country on shale, siltstone and sandstone. Slopes carry acid stony residuum, hollows collect colluvium, and the narrow bottoms sit on alluvium.

That ground sheds water fast and holds it badly. A thin base shows it first: the surface ruts, the edges break away, and the stone works down into the soft layer under it.

Build the base up before you surface anything. Use the coarser crusher run class where the subgrade is soft ground or old fill.

Erosion follows the same pattern. Across the North central plateau and western hills, slopes over about 14 degrees are where most slides start, and the usual triggers are development, road cuts and timber cutting.

Creek bank scour after heavy rain does the rest. Arm a bank or a culvert outlet with riprap rather than watching the fill leave.

Work runs from spring into late fall. A long wet spell, not frost, is usually what stops a base job, because this ground cannot be compacted while it is saturated.

Spring thaw is when a gravel drive shows what its base is worth. Cold winters bring repeated freeze-thaw, and frost depth is set by each jurisdiction, so confirm the figure that applies where you are building.

Materials for Shock Projects

Fines and screenings carry paths and walkways here. A walkable surface wants fine, tight material, not open clean stone that rolls underfoot.

Stone Screenings are crusher fines. They bed pavers, flagstone and brick, and they fill the joints between them.

Walkway Gravel surfaces paths, garden walks and side yards that want a finer finish than a drive takes.

Crusher Run is the everyday West Virginia base and drive material. Crushed stone with the fines left in, it locks up under a roller and holds a grade on a hillside drive.

Local yards sell it by top size, 3/4 inch and 1-1/2 inch and coarser.

Class 1 Base is the heavier base course under drives, parking pads, shop floors and slabs. Build it up when the subgrade is soft ground or old fill.

Class 2, the finer crusher run class, tightens the surface or caps a Class 1 layer.

Clean washed stone handles water. #57 Limestone is 1 inch clean stone for French drains, pipe bedding and construction entrances.

#8 Limestone is a small chip for paver joints, fine drainage and dressing over a compacted base.

Riprap armours banks and slopes. Use it on creek banks, culvert outlets and channel work after a washout.

Delivery to Shock and the Surrounding Area

Quantities are ordered by the ton or by the yard. Each product page has a calculator, so you can size the load before you check out.

Bulk delivery to a site in Shock means a dump truck tips the load in one pile. Have the drop spot clear and reachable before the truck arrives.

Shock sits in Gilmer County. Deliveries also cover Glenville, Sand Fork, Cedarville, Coxs Mills and Linn.

Questions About Ordering in Shock

What should I have ready when the truck arrives?

Have the drop spot clear, open and reachable for a dump truck. The load is tipped in one pile, so the ground you choose is where the material stays.

Keep vehicles and equipment out of the way, and make sure the approach will take a loaded truck on the day.

What is the best base under pavers in Shock?

Use crusher run for the base and stone screenings for the bedding layer. The fines in screenings let you set pavers tight and fill the joints, while the base underneath carries the load.

On soft ground or old fill, build up with Class 1 Base first, then tighten the surface with the finer material.

Size Your Load and Place the Order

Start with the calculator on the product page, then set your quantity by the ton or the yard. Choose a delivery date at checkout and the truck tips the load on site in Shock.

Order crusher run, washed stone, screenings, sand or soil from West Virginia Rock Supply whenever you are ready.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Shock, WV

What should I have ready when the truck arrives?

Have the drop spot clear, open and reachable for a dump truck. The load is tipped in one pile, so the ground you choose is where the material stays. Keep vehicles and equipment out of the way, and make sure the approach will take a loaded truck on the day.

What is the best base under pavers in Shock?

Use crusher run for the base and stone screenings for the bedding layer. The fines in screenings let you set pavers tight and fill the joints, while the base underneath carries the load. On soft ground or old fill, build up with Class 1 Base first, then tighten the surface with the finer material.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.